Facial-Flex Replacement Flex-Bands
First time users should find the 6 oz. resistance Flex-Bands adequate. As you become comfortable with the exercise and use of the device, you will need a higher resistance to continue your progress. Changing to a higher resistance Flex-Band challenges your muscles, increasing their strength and tone at a faster rate. Flex-Bands are available in an even higher strength of 14 oz. of resistance.
SKU: 001789 /
Folica is an authorized distributer of this product and guarantees its authenticity.Close
Each packet contains a six-month supply (when used as recommended).
Available in Three Resistance Strengths:
- 6oz.-Low resistance
- 8oz.-Medium resistance
- 14oz.-High resistance
For optimum results, the Flex-Band on your Facial-Flex should be changed weekly! This is important to achieve best results. The bands fatigue and the resistance decreases with use.
Remove the existing band by pulling it off the mounts located on top of the center abutments. Install the new Flex-Band by stretching the band over the mounts located on top of the center abutments. Make sure that the band is positioned properly on both mounts, and that no binding occurs when you compress Facial-Flex between your fingers.