| You are here: Home > Hair Removal > Product Types > Electrolysis > clean + easy Deluxe Home Electrolysisclean + easy Deluxe Home Electrolysis$37.95 was $39.95 YOU SAVE 6%
In stock, ready to ship today.
![]()
Remove unwanted hair forever with the clean + easy Deluxe Home Electrolysis! At-home electrolysis that's fast, safe and simple. Product Benefits:
Directions: Set Comfort Control Dial to position one. Push the slide button forward to
expose the stylet tip. Hold the stylet like a pen with fingers around touchband.
Be sure your fingers are moist (not dripping wet) throughout use to ensure
circuit is complete. Overly wet fingers will cause unsatisfactory results. Do
not squeeze skin adjacent to the hair being removed. Excessive pressure will
cause skin damage. Note angle of hair growth, insert the stylet tip along the
underside of the hair and into the follicle. Use only downward pressure as
sideways pressure will bend the tip. Hold the stylet tip firmly in place. When
proper contact has been made, you will feel a tingling sensation. If you do not
feel a slight tingle with the Comfort Control Dial set at mid-range, gradually
increase the setting until a tingling sensation is felt. This indicates that the
current is flowing. In addition, try gently rotating the stylet tip in the
follicle a few times to make sure you are contacting the hair root. When you
feel slight tingling, hold the stylet firmly in place and count to 15 slowly.
This will indicate that you have treated the hair for approximately 15 seconds.
Remove stylet and use tweezers to gently remove the hair. If the hair resists,
or if the skin "lifts", reinsert the stylet and treat for another 15 seconds.
Treatment time will also vary depending on the position of the Comfort Control
Dial and upon the area you are treating. Experiment until you find your
treatment cycle but do not treat for more than two 15-second cycles at a single
sitting. Overly moist fingers or excessive treatment may cause "pitting" of the
skin which may lengthen the healing process. Once treatment is completed, remove
the hair with tweezers. Should you experience any resistance, the root has not
been destroyed. Repeat treatment after 48 hours. Electrolysis has been
successful when hair can be removed with tweezers without resistance. Treatment
time may vary between individuals and depends on the area being treated. Always
keep tweezers handy to avoid having to take your eyes off the treated area.
After treatment, clean skin with isopropyl alcohol once again. Do not apply
make-up, perfume or expose treated areas to the sun for 24 hours. Hyperpigmentation (skin discoloration) may be experienced by people who have
a history of hypersensitivity. If you have this condition, we do not recommend
use of this product. If you are unsure whether or not to use the Deluxe Home
Electrolysis, please consult your physician. Do not use if you have any of the following conditions: Diabetes, Hepatitis, Blood disorders, Pigmentation problems, Lupus, Scleroderma (Pigmentosis), Impetigo, Chronic skin disorders; or if you: scar easily, wear a pacemaker or similar device, are pregnant; or if you are taking medication such as: Retin-A, Accutane, Glycolic acid, Alpha Hydroxy treatments or Steroids that may cause skin sensitivity. Do not use on your upper lip if you currently wear braces. Do not use to remove moles, warts, and beauty spots, or on nipples, eyelids, eyelashes, tattoos, and sunburned skin or inside nose or ears. Product Reviews and Rating: clean + easy Deluxe Home Electrolysis is rated
(3.55 out of 5) based on 84 reviews by users.
This does a great job, but you must have patience for the time it takes. Also, the needles bend very easily. the product does not work, don't waste your time. no current, no penetration, no hair removal. Initially you might feel like it isn't working but do not give up. You need time and patience to work with the equipment, but hang on and only do it yourself the places that you can reach and see if you can get your friend help you as some areas are nearly impossible to do yourself. Please do not do it in a hurry, you might end up scarring yourself. Do not put the power setting to max(1-10) start at the lowest setting and only increase it to the level that you need , i think 4 should work even for strong black hairs. After some practice you would know which setting is best for you.Rub some Isoprophyl alcohol on the area that you would be working on.The probe(needle) bends easily so be careful. i bought this thing a few months ago. it works good. however, those who made it didn't notice that the needle itself goes inside the metal which holds it. i bought a bunch of needles, and every time i use a new one it goes inside and it only touch the hair from outside. it is supposed to reach the hair root. and whats the use of it if it doesn't??? i hope those who made it read this, and work more on improving their inventions. I BOUGHT THIS ITEM AS A GIFT FROM FOLICA FOR XMAS. I PURCHASED ON THE 21ST SO I WAS NOT SURE IF I COULD RCV IN TIME FOR XMAS. I CALLED ON THE 23RD AND DID NOT REALLY GET A TRACKABLE YES OR NO AS THE POSTAL SERVICE WAS THE CARRIER...BUT REALLY FEDEX. IT ARRIVED RIGHT ON TIME ON 24TH...NO PROBLEMS...FOLICA REALLY CAME THROUGH! THANKS!! Read all 84 customer reviews ...
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() | ![]() | ![]() | ![]() | ![]() |
| |||||