|
Facial-Flex Replacement Flex-Bands are used with the Facial-Flex Ultra Facial Exercise and Toning System.
First time users should find the 6 oz. resistance Flex-Bands adequate. As you
become comfortable with the exercise and use of the device, you will need a
higher resistance to continue your progress. Changing to a higher resistance
Flex-Band challenges your muscles, increasing their strength and tone at a
faster rate. Flex-Bands are available in an even higher strength of 14 oz. of
resistance. Each packet contains a six-month supply (when used as recommended). Available in Three Resistance Strengths: - 6oz.-Low resistance
- 8oz.-Medium resistance
- 14oz.-High resistance
For optimum results, the Flex-BandTMon your Facial-Flex® should be changed
weekly! This is important to achieve best results. The bands fatigue and
the resistance decreases with use. Directions: Remove the existing band by pulling it off the mounts located on top of the
center abutments. Install the new Flex-Band by stretching the band over
the mounts located on top of the center abutments. Make sure that the band
is positioned properly on both mounts, and that no binding occurs when you
compress Facial-Flex between your fingers. Product Reviews and Rating:
Be the first to write a product review for Facial-Flex Replacement Flex-Bands.
| 
